Mechanical Engineering

Continuum Mechanics and Thermodynamics

Archive of Applied Mechanics

Computational Mechanics

Acta Mechanica

Chinese Journal of Mechanical Engineering (Springer Open)

Acta Mechanica Solida Sinica

• Influence of modeling approaches and structural parameters on impact resistance of the human porous cranium

• Experimental and numerical investigations into flow features in an intake duct for the waterjet propulsion under mooring conditions

• Solvent-aided phase separation in hydrogel towards significantly enhanced mechanoresponsive strength

• On Nix’s Theorem for Two Skew Dislocations in Anisotropic Elastic Materials with a Parabolic Boundary

• Three-Dimensional Elastic Scattering Coefficients and Enhancement of the Elastic Near Cloaking

• Gradient Damage Analysis of a Cylinder Under Torsion: Bifurcation and Size Effects (Open Access)

• Enhanced Fracture Resistance Induced by Coupling Multiple Degrees of Freedom in Elastic Wave Metamaterials with Local Resonators

• Finite element simulation of ductile fracture in polycrystalline materials using a regularized porous crystal plasticity model (Open Access)

• An analysis of deformation and failure in rectangular tensile bars accounting for void shape changes

• Nucleation under multi-axial loading in variational phase-field models of brittle fracture

• Viscoelastic phase-field fracture using the framework of representative crack elements (Open Access)

• An integrated torque-vectoring control framework for electric vehicles featuring multiple handling and energy-efficiency modes selectable by the driver (Open Access)

• On the dynamics of vibro-impact systems with ideal and non-ideal excitation

• Nonlinear vibration of a lumped system with springs-in-series (Open Access)

• Nonlinear modeling and analysis of rotors supported by magnetorheological squeeze film journal bearings

• Kinematics of the motorcar body side deformation process during front-to-side vehicle collision and the emergence of a hazard to car occupants (Open Access)

• Optimizing wheel profiles and suspensions for railway vehicles operating on specific lines to reduce wheel wear: a case study (Open Access)

• Hardware acceleration of multibody simulations for real-time embedded applications

• Deep learning of multibody minimal coordinates for state and input estimation with Kalman filtering

• Stability of rigid body motion through an extended intermediate axis theorem: application to rockfall simulation (Open Access)

• SEIR modeling of the COVID-19 and its dynamics

• Nonlinear dynamic analysis of an epidemiological model for COVID-19 including public behavior and government action

• Spatially localized vibrations in a rotor subjected to flutter (Open Access)

• A review of the mechanical inerter: historical context, physical realisations and nonlinear applications (Open Access)

• Resonant modal interactions in micro/nano-mechanical structures (Open Access)

• 3D Strain Field Evolution and Failure Mechanisms in Anisotropic Paperboard (Open Access)
• Reflected Near-field Blast Pressure Measurements Using High Speed Video (Open Access)
• Development and Validation of a Hopkinson Bar for Hazardous Materials (Open Access)
• A Simple Contact Mechanics Model for Highly Strained Aqueous Surface Gels (Open Access)
• Solid Cylinder Torsion for Large Shear Deformation and Failure of Engineering Materials 

• Topology Optimization Methods for 3D Structural Problems: A Comparative Study (Open Access)

• A Review on Fracture Analysis of CNT/Graphene Reinforced Composites for Structural Applications

• A Multiscale Approach for the Numerical Simulation of Turbulent Flows with Droplets

• An Advanced Susceptible-Exposed-Infectious-Recovered model for quantitative analysis of COVID-19
• Mechanical, tribological and microstructural characterization of stir cast Al-6061 metal/matrix composites—a comprehensive review
• Bidirectional integrated on-board chargers for electric vehicles—a review
• Additive manufacturing of ceramics and cermets: present status and future perspectives
• Harnessing microbially induced calcite precipitates to use in improving the engineering properties of loose sandy soils

• A novel fault diagnosis method based on EMD, cyclostationary, SK and TPTSR

• Design of T-shaped tube hydroforming using finite element and artificial neural network modeling

• A sparse auto-encoder method based on compressed sensing and wavelet packet energy entropy for rolling bearing intelligent fault diagnosis

• Performance analysis of radial-inflow turbine of ORC: New combined approach of preliminary design and 3D CFD study

• Parametric optimization in wire electric discharge machining of DC53 steel using gamma phase coated wire

• Enhancement of adhesion between the polymeric liner and the metallic connector of high-pressure hydrogen storage tank
• On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation
• Experimental characterisation on the behaviour of PLLA for stretch blowing moulding of bioresorbable vascular scaffolds (Open Access)
• Modelling of shrinkage formation in casting by the phase field method
• A modified Johnson-Cook model of AA6061-O aluminum alloy with quasi-static pre-strain at high strain rates

• Effect of Marine Environmental Conditions on Physical and Mechanical Properties of Fiber-Reinforced Composites—A Review (Open Access)
• Influence of End Mill Geometry on Milling Force and Surface Integrity While Machining Low Rigidity Parts (Open Access)
• Treatments of Micro-channel Flows Revisited: Continuum Versus Rarified Gas Considerations (Open Access)
• Circular Economy of Plastics: Wishful Thinking or A Way Forward?

International Journal of Dynamics and Control

Computational Particle Mechanics

Experimental Techniques

Journal of Dynamic Behavior of Materials

Human Factors and Mechanical Engineering for Defense and Safety

• Modeling Transmission Dynamics and Risk Assessment for COVID-19 in Namibia Using Geospatial Technologies

• An Energy-Resolved Optical Non-invasive Device Detects Essential Electrolyte Balance in Humans at Point-of-Care

• Design Concepts for NiTiNOL Wires to Function as a Sensor (Open Access)

• A Journey of Laser-Induced Graphene in Water Treatment

• Design and Development of a Robotic Hand with Embedded Sensors Using 3D Printing Technology

Journal of Peridynamics and Nonlocal Modeling

• Lightweight in Automotive Components by Forming Technology (Open Access)

• Progress in Automotive Transmission Technology (Open Access)

• Study of Series-Parallel and Power-Split DHT for Hybrid Powertrains (Open Access)

• Spring-Arrangement Effect on Flow-Induced Vibration of a Circular Cylinder  (Open Access)

• 3D Model for Active Vibration Control of Rotating Machines Mounted on Active Machine Foot Mounts Using Vibration Mode Coupling by Asymmetry  (Open Access)

• Blind Application of Developed Smart Vibration-Based Machine Learning (SVML) Model for Machine Faults Diagnosis to Different Machine Conditions  (Open Access)

• Potential of Empirical Mode Decomposition for Hilbert Demodulation of Acoustic Emission Signals in Gearbox Diagnostics  (Open Access)

• Features of modeling the system of turbine unit with a variable contact zone of its stator parts

• Parametrical investigation for the optimization of spherical jet-stirred reactors design using large eddy simulations

• Cavitation Induced Damage in Soft Biomaterials

• Recent Computational Approaches on Mechanical Behavior of Axonal Cytoskeletal Components of Neuron: A Brief Review

• 2D Crack Propagation in High-Strength Concrete Using Multiscale Modeling

• An Introduction to Operator Preconditioning for the Fast Iterative Integral Equation Solution of Time-Harmonic Scattering Problems

• A Nano-Micro–Macro Multiscale Modeling for Carbon Fiber-Reinforced Graphene/Epoxy Nanocomposites

• Particle-based hybrid and multiscale methods for nonequilibrium gas flows​

• Recent investigations of shock wave effects and interactions

• Progress of discrete unified gas-kinetic scheme for multiscale flows